Call Us

(08) 9244 4622

Send us an Email

sales@allflow.com.au

Follow Us

LinkedIn

Oil Water Separator

  1. Home
  2. »
  3. Oil Water Separator

Oil Water Separator Process

Allflow are Oil Water Separator specialists in the Perth metro and surrounding regions. These are specifically designed to separate gross amounts of oil and suspended solids from the wastewater effluents in various industrial plants.

Allflow’s Oil Water Separators are designed to operate based on the specific gravity difference between the oil and the wastewater because that difference is much smaller than the specific gravity difference between the suspended solids and water. Based on this design application, most of the solids that are suspended will settle to the bottom of the separator as a sediment layer, while the oil rises to top, and the wastewater will be the middle layer between the oil on top and the solids on the bottom. The process of the oil water separator is to skim off the oil layer and the bottom sediment layer is removed by scraper and a sludge pump.

Benefits of an Oil Water Separator System

In a world where sustainability is becoming increasingly important, re-use and recycling are becoming a focus for businesses. An oil water separator can greatly reduce water usage, having both economical and environmental benefits by reducing water usage costs and creating less waste byproduct from wash pads, wash bays and commercial cleaning applications.

Oil Water Separator-Flat bottom VGS & extended body VGS oil water separator

Applications for Oil Water Separators

Allflow's Oil Water Separators and Accessories

Get Into Touch